The beads size is about 1.4~1.6 mm,mainly component is ( ZrO2+HfO2+Y2O3)≥99%,
and active concentration of uranium-238 in zirconia blocks should not exceed 1.0.
The beads are the properly size for the sintered teeth,with outstanding abrasive resistance and good corrosion resistance.
Because the zirconia beads play a role in support the teeth during the sintering of the teeth, the larger zirconium beads,
the smaller contact area with the teeth.If the zirconium beads are too small, they will also be inserted into the teeth.
Zetin zirconia beads selected after many times experimental results,so the bead size is appropriate.
By expanding the contact area with the teeth, the zirconia teeth are not easily deformed during the sintering process, and it has a good supporting and fixing effect.
The most important that high density zirconia bead is used to achieve good results at minimum contamination rates.
Packing in wooden case as export standards or as customers’ request
Each piece of wood wrapped around the plastic film.
NOTE: If you order more than 4 sets of goods, we will make pallets for free.